Video

Hình ảnh

2015. Category: Bộ truyền DNC One NET

DNC One NET is used to transfer or drip-feed NC programs to CNC machines via RS232 port or parallel port. DNC One NET provides the ability to connect using Ethernet or Wi-Fi network, and equiped USB Flash Driver, which give many friendly options.

Features:

Product name	DNC One NET – Wired and wireless DNC Network
Made	AUSYS, Vietnam
Photos
Some design characteristics	Demensions 120x180x35mm. Weight 350g. Plastic box. 04 magnets. 01 DC power supply port 7÷40V 2A. 01 RS232 port (9 pins). 01 parallel port (50 pins). 01 double USB socket to connect USB Wi-Fi. 01 double USB socket to connect USB Flash Drive. 01 Ethernet 10/100 Mbit/s port. 05 LEDs indicator: READY: ready to transfer alert. SEND: data is transmitted alert. REQUEST: alert the requirements signal from CNC in parallel mode. NETWORK: status of the network connection. ERROR: alert an error occurred. 04 functional buttons: ▲: go up ▼: go down SET: select RESET: restart the DNC One LCD16x2 screen: display status, files list, setting parameter, alarm, ect.
Power supply	Supply power to the DNC One NET in several ways: Use 7 ÷ 40V DC 2A Adapter power supply directly. Use power supply from RS232 port. Use power supply from parallel port. Note: At the same time just choose one way to supply the power
Some types of CNC can use DNC One NET	It is compatible with all kinds of CNC machines which use RS232 port (or parallel port as Fanuc system 6) for getting NC programs. FANUC Mitsubishi Yasnac Mazak Okuma etc, Note: The DNC drip-feeding is allowed only for machines having the DNC function.
DNC Features	The speed copying files over the network up to 10Mbytes/s. Select the file from the internal memory or from USB Flash Drive. Send G-code to CNC machine via RS232 protocol. Receive G-code or parameter from CNC machine via RS232. Send G-code to older CNC model via parallel port 50 pins. Automatic cutting program. Compatible all kinds of USB2.0 File extention .NC, .TAP, *.TXT are possible. The selected file to send will be remembered in the next transmission (no need to select file again). Display parts count. Display percent of transmitted data.
The data area can access to select files
1. Using data from USB	When installed using USB Host port, the transmitter will point to the data of USB Flash Drive, CNC machine operators will choose to transfer files from USB.
2. Using the internal memory	One DNC NET is designed to integrate an internal memory up to 4GB. Internal memory capacity can be upgraded depending on customer requirements. Meanwhile, the files will be sent to the processing of internal memory via the Ethernet protocol, Wi-Fi, Internet.
The methods of using DNC One NET
1. Using USB Flash Drive	USB connected to the transmitter at USB Host port.
2. Wired connection between the computer and the transmitter - Short distances	Communication between the computer and the transmitter connected together using RJ45 network cable. The distance of connection less than 100m.
3. Wired connection between the computer and the transmitter – Long distances	Use the medial SWITCH after every 100m to buffering signal. Interconnected with RJ45 network cable.
4. Wired connection between multiple computers and multiple transmitters via LAN communication
5. Wired connections between computers using the World Wide Internet and transmitters
6. Wireless connection between the computer and the transmitter - Short distances
7. Wireless connection between the computer and the transmitter - Long distances	Use the Wi-Fi Repeater after every 50m to buffering signal.
8. Wireless connections between multiple computers and multiple transmitters via Wi-Fi communication
9. Wireless connections between computers using the World Wide Internet and transmitters
10. Model of overall connection
DNC One NET accessories * The following accessories are only for reference , customers can fully use the accessories have equivalent parameters.
1. RJ45 cable
2. USB Wi-Fi	USB Wi-Fi Tenda W311U+ 150Mbps
3. Switch	Switch 8 ports TP-LINK SF1008D
4. Wi-Fi Repeater	Repeater Tenda A5 N150
5. Modem ADSL	TP-Link wireless G ADSL2 - Modem Router TDW8901G
Duration of warranty	24 months